You can purchase our turnkey kettles by themselves custom, as seen in the system. Attached (at the bottom of the article) are the quotes for each tank in each sized system. Simply write us which one you would like!


To make each kettle functioning, you may also be interested in the accessories below. 


Note: We can't source the pumps, probes, plugs, panel, table or chiller separately in a custom system kettle order


For the Hot Liquor Tank:

Quantity neededItemPart DescriptionPrice
125' or 50' HERMS Coil depending on size of kettleCoil fixed inside of the HLT that cycles water from the Mash, picking up heat from the HLTDepends on size
11.5" TC Element for $75.00 USD eachOur 5500W 240V Ultra low watt density ripple element$75.00
4Stainless Steel Ball Valve - 3 Piece for $25.00 USD eachEasy to disassemble valve used for regulating flow of all water/wort ports $100.00
4Quick Connect Fitting - MQC x MNPT for $6.00 USD eachMale fitting that attaches to 3 piece ball valve, making it simple to attach hosing$24.00
1v3 Pickup Tube - Shorty for $25.00 USD eachDrain dip tube designed specifically for our HLT to maximize sparge water reclaim from HLT$25.00
1v3 Pickup Tube - Side for $28.00 USD eachDip tube capable of wort reclaim on drain ports, creating whirlpools and re-circulation or wort$28.00
121 ft. Silicone Tubing for $2.50 USD eachOur recommended hosing for all kettles$30.00
6Quick Connect Fitting - FQC x Barb for $14.00 USD eachFemale fitting that attaches to hosing, making it simple to attach hosing to ball valves$84.00
1Thermometer - Adjustable Face for $50.00 USD eachStandard analog thermometer for temperature measurement in lieu of digital options$50.00


For the Mash Tun:

Quantity neededItemPart DescriptionPrice
1v3 False BottomSlitted kettle insert that keeps grain material from draining out of your mash tunDepends on size
1v3 Pickup Tube - Side for $28.00 USD eachDip tube capable of wort reclaim on drain ports, creating whirlpools and re-circulation or wort$28.00
2Stainless Steel Ball Valve - 3 Piece for $25.00 USD eachEasy to disassemble valve used for regulating flow of all water/wort ports $50.00
61 ft. Silicone Tubing for $2.50 USD eachOur recommended hosing for all kettles$15.00
2Quick Connect Fitting - MQC x MNPT for $6.00 USD eachMale fitting that attaches to 3 piece ball valve, making it simple to attach hosing$12.00
2Quick Connect Fitting - FQC x Barb for $14.00 USD eachFemale fitting that attaches to hosing, making it simple to attach hosing to ball valves$28.00


For the Boil Kettle:

Quantity neededItemPart DescriptionPrice
2Stainless Steel Ball Valve - 3 Piece for $25.00 USD eachEasy to disassemble valve used for regulating flow of all water/wort ports $50.00
1Thermometer - Adjustable Face for $50.00 USD eachStandard analog thermometer for temperature measurement in lieu of digital options$50.00
Quantity depends on size1.5" TC Element for $75.00 USD eachOur 5500W 240V Ultra low watt density ripple elementDepends on size
2v3 Pickup Tube - Side for $28.00 USD eachDip tube capable of wort reclaim on drain ports, creating whirlpools and re-circulation or wort$56.00
61 ft. Silicone Tubing for $2.50 USD eachOur recommended hosing for all kettles$15.00
2Quick Connect Fitting - MQC x MNPT for $6.00 USD eachMale fitting that attaches to 3 piece ball valve, making it simple to attach hosing$12.00
2Quick Connect Fitting - FQC x Barb for $14.00 USD eachFemale fitting that attaches to hosing, making it simple to attach hosing to ball valves$28.00