Please follow these instructions to assemble your Trio System Table! 


Tables Purchased in 2023


Please reference page 18 of the Trio User Guide HERE.


Tables Purchase before 2023

  1. The table has a table top, a smaller shelf and 4 legs (6 for the 50 gallon), one of which has a pump mount welded on it. Put the table top on its back on the ground. 
  2. Install the legs that have no pump mount to the table top. Use 2 included screws to tighten each leg.
  3. To install the leg with the pump mount on the table top, first remove the foot of the leg. We recommend using a broom handle. Put the broom handle inside the leg and push it against the foot to remove it.
  4. After you install all legs, move the small shelf over the four legs to a desired position. Use two screws for each leg to tighten it. Install the foot back on the leg with the pump output.