Carb Stone

How to use our Carb Stone

How to Carbonate
Once your beer is done fermenting and ready to be carbonated, you’ll want to attach your sanitized cab stone to the racking port of the conical The gas...
Tue, 3 Apr, 2018 at 12:43 PM
How to Oxygenate
You will need to oxygenate large volumes of wort in a sterile, precise and timely fashion to achieve a good fermentation.  Simply fill your con...
Fri, 9 Feb, 2018 at 12:21 PM
What pressure should I set my carb stone at?
https://spikebrewing.com/pages/carbonation-chart The link above prescribes what psi to carbonate at depending on the temperature of your conical
Thu, 18 Jan, 2018 at 11:48 AM
Will the Carb Stone work on the Racking Arm?
The gas stone works so long as liquid is touching it and gas bubbles can escape to the rest of the tank. Since the racking arm would not inhibit the flow of...
Thu, 11 Jan, 2018 at 11:39 AM
Wetting pressure
Wetting pressure refers to the amount of pressure it takes before gas can move through a gas stone. This is important because when you set your regulator to...
Tue, 6 Feb, 2018 at 1:15 PM
Micron view
We tested the 5 micron size of our sintered steel stones and the test didn't disappoint! See attached image to confirm sizing
Fri, 16 Feb, 2018 at 11:38 AM
How to clean my carb stone
After use, the carb stone should soak in Alkali Brewers Wash or similar product for at least 24 hours. After a good long soak, rinse with warm water while a...
Tue, 3 Apr, 2018 at 12:46 PM