The racking port enables a racking arm to be employed, which allows you to control pulling above the yeast cake into any storage vessel. The closed pressure ...
Wed, 27 Mar, 2019 at 9:32 AM
Yes you can! You'll just need our TC100 package or a fridge that fits your Flex.
Wed, 27 Mar, 2019 at 9:38 AM
It’s recommended for lagering or ales with extended time needed for clarity.
Wed, 27 Mar, 2019 at 9:39 AM
With the racking arm positioned in the down position, there is 0.22 gallons of deadspace.
Wed, 27 Mar, 2019 at 9:40 AM
See attached for first use and care instructions.
Wed, 27 Mar, 2019 at 9:43 AM
The Flex enables you to minimize oxygen exposure because you can keep the vessel sealed throughout all use of the vessel, especially for packaging. Oxygen e...
Mon, 8 Apr, 2019 at 10:17 PM
On the Flex, the racking port is angled horizontally into the vessel, while on the conical, it is pointed upwards. Can I still expect accurate carbonation with this arrangement?
Yes, the stone will work with any racking arm configuration.
Wed, 27 Mar, 2019 at 9:44 AM
We do not currently have a bolt on solution but one of our engineers quickly assembled a part that would work. It is an airlock bung, gas post and a ball lo...
Wed, 27 Mar, 2019 at 9:52 AM
A full Flex weighs upwards of 70lbs. Although the handles are designed and tested to support that weight we do not recommend lifting when full. The liquid i...
Mon, 8 Apr, 2019 at 10:16 PM
The Flex Standard says it can hold 2 psi, is this just normal fermentation level or can I add pressure on my own to this version?
If you want to cold crash the standard vessel and apply 2 PSI to the flex, this can be beneficial to avoid suck back of oxygen or sanitizer that can occur. ...
Wed, 27 Mar, 2019 at 10:07 AM